Product Details
ARDEX V 2001 T
Cementitious Filling Compound and Smoothing Plaster
- For meshed plastering of XPS, EPS, rock wool and similar insulation plates
- The filling of joints in cement-based and similat structural panels, as well as plastering their surfaces with mesh
- Can be used as leveling and filling plaster under finishing mineral plasters
- Can be applied on concrete, cementitious plaster, bricks, briquette and wall surfaces
- Water and frost resistant
- Flexible and easy to apply
- Conforms to TS EN 998-1 GP CS IV W1 class
ARDEX V2001 T: High-Performance Cement-Based Plaster
ARDEX V2001 T is a versatile, cement-based plaster for mesh-reinforced applications on insulation boards like XPS, EPS, and stone wool. Suitable for both indoor and outdoor use on walls and ceilings, it offers excellent flexibility, water repellency, and resistance to external conditions. Easy to apply, it dries quickly and provides high compressive and flexural strength. Ideal for leveling and smoothing surfaces, it ensures durable and reliable results.
Description
ARDEX V 2001 T is cement based thermal insulation plate plastering mortar used on interior and exterior walls and facades. It’s mainly used meshed plastering of Expanded Polystyrene (XPS), Extruded Polystyrene (EPS), rock wool insulation plates and cementitious structural panels. Suitable for concrete, cementitious plaster, bricks, briquettes and wall surfaces.
Use
Indoors and outdoors; on walls and ceilings.
Suitable for mesh-reinforced plastering of extruded (XPS), expanded (EPS), stone wool insulation boards, and cement-based construction boards. Can be applied on concrete, cement plaster, brick, cinder block, and wall surfaces.
Considerations
Extreme hot and cold conditions may affect application time, curing time and strength gain negatively. Therefore, the environment temperature as well as the substrate must be between +5°C and +30°C.
Using cool mixing water and avoiding application under sun exposure may help particularly for summer days. The surface must be protected from sun exposure, wind and frost until curing is completed.
For surfaces with an ARDEX V 2001 T foundation, consider using the ARDEX B 10 cement-based satin plaster, whether as a filler or final coat plaster.
In case of doubt, carry out a test application.
Packaging
25 kg kraft bag
Shelf Life and Storage
Can be stored for approximately 12 months in its original unopened packaging, in a dry and cool environment, protected from sunlight and frost.
Mixing Ratio
6.5 liters of water for 25 kg of powder
Fresh Mortar Density
Approximately 1.5 kg/l
Material Requirement
Approximately 1.70 kg/m²-mm
Open Time*
Approximately 10 – 20 minutes
Drying Time*
- Initial: Approximately 5 hours
- Final: Approximately 18 hours
*Values calculated in laboratory conditions at +20°C temperature and 65% relative humidity. Environmental and weather conditions may alter these values. Higher temperatures and lower relative humidity shorten these times, while lower temperatures and higher relative humidity extend them.
Thermal Conductivity
0.60 W/(mK) (P= 50%)
Compressive Strength
Approximately 18 N/mm² after 28 days
Flexural Strength
Approximately 6.5 N/mm² after 28 days
GHS/CLP Classification
GHS 05, Corrosive
GGVSEV/ADR Classification
None
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
How can I achieve effective mesh-reinforced plastering on insulation boards?
ARDEX V 2001 T is a cement-based plaster ideal for mesh-reinforced applications on insulation boards like XPS, EPS, and stone wool. It offers flexibility, water repellency, and resistance to external conditions.
What are the suitable applications for ARDEX V 2001 T?
ARDEX V 2001 T is suitable for both indoor and outdoor use on walls and ceilings. It can be applied on concrete, cement plaster, brick, cinder block, and wall surfaces, as well as for filling joints and leveling under final mineral plasters.
How do I mix and apply ARDEX V 2001 T for optimal results?
Mix 25 kg of ARDEX V 2001 T powder with 6.5 liters of water to achieve a workable consistency. The open time is approximately 10-20 minutes, with an initial drying time of about 5 hours and final drying time of approximately 18 hours.
What are the benefits of using ARDEX V 2001 T?
ARDEX V 2001 T offers high compressive and flexural strength, water and frost resistance, and easy application. It ensures durable and reliable results for various construction projects.
What is the shelf life and storage condition for ARDEX V 2001 T?
ARDEX V 2001 T can be stored for approximately 12 months in its original unopened packaging, in a dry and cool environment, protected from sunlight and frost.
How can I level and smooth surfaces effectively with cement-based plaster?
Using a high-performance cement-based plaster like ARDEX V 2001 T ensures effective leveling and smoothing of surfaces, providing a durable and reliable finish.
What is the best plaster for mesh-reinforced applications on insulation boards?
ARDEX V 2001 T is ideal for mesh-reinforced applications on insulation boards like XPS, EPS, and stone wool, offering excellent flexibility and resistance to external conditions.
How do I ensure a cement-based plaster is water and frost-resistant?
Choose a plaster like ARDEX V 2001 T, which is specifically formulated to be water and frost-resistant, ensuring long-lasting durability for indoor and outdoor applications.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.