Product Details
SEIREPOX IMPRIMACIÓN SNELL
Fast Curing Epoxy Resin
- Mineral yüzeyler üzerine çok iyi yapışma
- Very good adhesion on mineral substrates
- Surface hardener
- Fast curing
- Primer for continuous polymeric flooring
- Solvent-free (100% solids)
- Good wetting and penetration power
- Easy to apply
- Can be mixed and/or dusted with sand
- For indoor and outdoor use
Product Description
SEIREPOX IMPRIMACIÓN SNELL is a fluid, two-component, solvent-free, fast-curing epoxy resin and has excellent wetting properties for use as a surface hardener and as a primer with- SEIRE epoxy and polyurethane paints.
After curing, SEIREPOX IMPRIMACIÓN SNELL is resistant to the passage of water, chemicals, frost and weathering.
Using areas
— Sealant and hardener of concrete and mortar flooring.
— Primer for epoxy and polyurethane products on concrete or mortar substrates.
— For indoor and outdoor use.
— Rapid curing helps reduce execution and back into service times.
Packaging
Kits of 20 kg
Shelf Life and Storage
SEIREPOX IMPRIMACIÓN SNELL can be stored for up to 12 months in its original unopened packaging. The product should be stored in a dry place between +5°C and +30°C. Keep away from frost, direct sunlight and sources of heat
Mixing Ratio:
As indicated on packaging
Density:
Approx. 1.10kg/L
Consumption:
200 – 300 g/m²
Workability Time (20°C):
Approx. 15 minutes
Recoatable (20°C):
16 hours
Chemical Resistance (20°C):
7 days
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.