SEIRE WP PRIMER

Density (20°C)

Approximately 1.0 kg/L

Viscosity (25°C)

Approximately 3500 cps

Mixing Ratio

By weight 3:1

Adhesion to Concrete

>2 N/mm²

Pot Life (23°C)

60 – 90 minutes

Initial Curing Time (23°C)

5 – 6 hours

Time to Apply Topcoat

Up to 24 hours

Dilution

With water (maximum 20%)

Technical Data Sheet

Declaration of Performance

Safety Data Sheet of Component A

Safety Data Sheet of Component B

Frequently Asked Questions About SEIRE WP PRIMER

What is SEIRE WP PRIMER?

SEIRE WP PRIMER is a two-component, water-based, multi-purpose epoxy resin primer specifically designed for use before applying SEIRE WP series products. It ensures optimal adhesion and performance of the topcoat in various applications.

What are the benefits of using SEIRE WP PRIMER?

Using SEIRE WP PRIMER offers several advantages:

• Enhanced Adhesion: Provides strong bonding between the substrate and the SEIRE WP series topcoat.
• Versatile Application: Suitable for both absorbent and non-absorbent surfaces, offering flexibility in various environments.
• Water-Based: Environmentally friendly with low VOC emissions.
• Multi-Purpose: Can be used in both indoor and outdoor environments, ensuring consistent performance across different conditions.
• Improved Durability: Enhances the longevity and performance of the applied topcoat by providing a robust priming layer.

What types of surfaces can I apply SEIRE WP PRIMER on?

SEIRE WP PRIMER is suitable for use on both absorbent and non-absorbent surfaces, including:

• Concrete
• Asphalt
• Ceramic
• Metal
• Other non-absorbent surfaces prepared for bonding

It is ideal for both indoor and outdoor environments, ensuring versatile application across various projects.

How do I apply SEIRE WP PRIMER?

To effectively apply SEIRE WP PRIMER, follow these best practices:

• Prepare the Surface: Ensure the surface is clean, dry, and free from old layers, grease, silicone, and other contaminants.
• Shake Well: Shake both components thoroughly before application to ensure proper mixing.
• Mix Properly: Follow the mixing ratio by weight of 3:1 precisely to achieve optimal performance.
• Apply Evenly: Use a suitable roller or spreading tool to apply the primer evenly across the surface, ensuring complete coverage.
• Allow to Dry: After application, allow the primer to dry for approximately 5-6 hours. The topcoat can be applied up to 24 hours after priming.

What are the important considerations when using SEIRE WP PRIMER?

When using SEIRE WP PRIMER, keep the following considerations in mind:

• Surface Preparation: Ensure the surface is clean, dry, and free from contaminants to achieve optimal adhesion and performance.
• Optimal Conditions: Apply the primer in a dry environment with temperatures between +5°C and +30°C. Ensure adequate ventilation in the application area.
• Mixing Ratio: Follow the mixing ratio by weight of 3:1 as specified on the packaging precisely to ensure the primer’s integrity and effectiveness.
• Application Limits: Adhere to the recommended consumption rate of approximately 0.6 – 1.0 kg/m² to maintain performance and prevent surface defects.
• Drying and Curing: Allow sufficient drying time before subjecting the floor to traffic. Walkability is possible after approximately 24 hours, and full drying is achieved in about 7 days.
• Dilution: The primer can be diluted with water up to a maximum of 20% to adjust viscosity if necessary.
• Cleanup: Clean up any spills immediately to prevent surface defects and ensure the integrity of the primer layer.
• Protective Measures: Use appropriate protective gear and avoid contact with incompatible materials to prevent chemical reactions and maintain product performance.

How should I store SEIRE WP PRIMER to maintain its effectiveness?

SEIRE WP PRIMER should be stored in its original, unopened packaging in a dry, cool place with temperatures between +5°C and +30°C. Keep the product away from frost, direct sunlight, and heat sources. Once opened, ensure the packaging is tightly sealed to prevent moisture contamination and use the product within its shelf life.

What is the shelf life of SEIRE WP PRIMER?

SEIRE WP PRIMER has a shelf life of approximately 12 months when stored correctly in its original, unopened packaging in a dry, cool environment. Protect the product from frost, direct sunlight, and heat sources to ensure its longevity.

What is the mixing ratio for SEIRE WP PRIMER?

The mixing ratio for SEIRE WP PRIMER is by weight 3:1 as indicated on the packaging. It is crucial to follow the manufacturer’s instructions precisely to achieve the desired priming properties and ensure optimal performance.

What is the adhesion strength of SEIRE WP PRIMER to concrete?

The adhesion strength of SEIRE WP PRIMER to concrete is approximately 2 N/mm².

What is the pot life of SEIRE WP PRIMER?

SEIRE WP PRIMER has a pot life of approximately 60 – 90 minutes at 23°C, allowing sufficient time for application before the mixture begins to set.

What is the initial curing time of SEIRE WP PRIMER?

The initial curing time for SEIRE WP PRIMER is approximately 5 – 6 hours at 23°C.

When can I apply the topcoat after priming with SEIRE WP PRIMER?

The topcoat can be applied up to 24 hours after priming with SEIRE WP PRIMER, allowing adequate drying time for optimal adhesion and performance.

Can SEIRE WP PRIMER be diluted?

Yes, SEIRE WP PRIMER can be diluted with water up to a maximum of 20% to adjust its viscosity if necessary.