Product Details
ARDEX P 62 SB
Concrete Repair Primer
- Primer for strengthening porous and generally brittle, absorbent cement subfloors indoors
- For strenthening the subfloor prior to textile, pvc and parquet applications
- One-component, ready-to-use
- High penetration levels
- Solvent-free
- Very low emissions
ARDEX P 62 SB: Solvent-Free Primer
ARDEX P 62 SB is a solvent-free, single-component polyurethane primer designed to strengthen weak, dusty, and absorbent cement-based floors. Ideal for preparing surfaces for carpet, PVC, and parquet adhesives. It is easy to apply, with a working time of 60 minutes and a drying time of 1 hour. Suitable for indoor use, it can be stored for 12 months in a frost-protected environment.
Description
ARDEX P 62 SB is a single-component, ready-to-use, sodium silicate–based primer with very low emissions, designed to strengthen weak, porous, and absorbent cement-based substrates in indoor areas.
Use
Indoors. Floors.
Ready-to-use primer for strengthening porous and generally brittle, absorbent cement subfloors indoors.
Considerations
Processing not below floor temperature of +15 °C and room temperature of +18 °C, as well as room humidity preferably between 40 % and 65 %, maximum 75 %. All information is based on approx. 20 °C and 50 % relative air humidity. Low temperatures and/or high humidity can delay curing.
In cold weather, bring ARDEX P 62 SB to room temperature in heated rooms.
Puddles can impair the adhesion of later layers, therefore it is essential to prevent the compounds from pooling. Hardened pools of ARDEX P 62 SB Concrete Repair Primer must be mechanically removed before work is continued.
Do not use ARDEX P 62 SB Concrete Repair Primer where high screed moisture levels are present or where moisture has built up in structures in contact with earth. ARDEX P 62 SB Concrete Repair Primer is not suitable for use with calcium sulphate screed.
Open containers must be sealed tightly and used up quickly.
In case of doubt, carry out a test application.
Packaging
Canister with 11 kg net
Shelf Life and Storage
Can be stored in dry rooms for approx. 12 months in the original sealed container. Store in a frost-free place. Store in an upright position.
Base
Modified sodium silicate
Consumption
Approx. 600 g/m² (dependent on surface structure and absorbability of substrate)
Drying time*
3-5 days
*Values calculated under lab conditions (+20°C room temperature 65% relative humidty). Weather and environmental conditions may affect the values. Higher temperatures and low humidty decreases the time requried, whereas lower tetemperatures and high humidty increases it.
Suitable for underfloor heating
yes
GHS/CLP classification
none
GGVSEV/ADR classification
none
EMICODE
EC 1 Plus – very low emission
GISCODE
D1
Cleaning agent
fresh water
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
How does this primer help in strengthening weak cement-based surfaces?
This primer penetrates porous, weak, dusty, and crumbly cement-based surfaces, strengthening and stabilizing them to prepare for further applications like carpet, PVC, and parquet adhesives.
Is the primer ready-to-use?
Yes, this primer is a single-component, ready-to-use product. It does not require any mixing or preparation before application.
What is the shelf life of this primer?
The primer can be stored for approximately 12 months in its original unopened packaging. Opened packages should be tightly sealed and used as soon as possible to maintain effectiveness.
Can this primer be used on outdoor surfaces?
No, this primer is designed for indoor use only, specifically for floors.
What temperature should I apply this primer at?
The primer should be applied at temperatures above +15°C to ensure optimal performance.
Does the primer contain solvents?
No, the primer is solvent-free and very low emission, making it safe for use in various environments.
What surfaces is this primer suitable for?
This primer is suitable for porous, weak, dusty, crumbly, and absorbent cement-based surfaces, as well as concrete repair applications.
What is the coverage rate of this primer?
The material requirement is approximately 600 g/m².
How should I store this primer?
Store the primer in its original unopened packaging at temperatures above +5°C. Opened packages should be tightly sealed and used as soon as possible. The product is sensitive to frost.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.