Product Details
ARDEX CA 20 T
Multi-Purpose SMP Mounting Adhesive
- SMP polymer-based mounting adhesive sealant
- Suitable for indoor and outdoor applications
- Can be painted over with water-based paints without staining
- High adhesion strength without the need for primer
- Cures without sagging or shrinking, providing an elastic sealant that is resistant to vibrations
Versatile ARDEX CA 20 T SMP Polymer Adhesive Sealant
ARDEX CA 20 T is a silan-modified polymer (SMP) adhesive sealant suitable for indoor and outdoor use. It offers high adhesion without a primer, can be painted over, and is resistant to vibrations. It cures without sagging and can be used on various surfaces, including concrete, wood, metal, and ceramics. The product is available in white or gray, has a density of approximately 1.60 kg/l, and cures in about 24 hours for 2.5 mm thickness. Store in a cool, dry place for up to 12 months.
Product Type
Silan-modified polymer-based product that cures and gains strength upon reacting with moisture.
Applications
Used indoors and outdoors, on walls and floors.
- Bonding profiles, skirting boards, cable ducts, insulation panels, wooden and synthetic elements, metal profiles, parquet and wooden floors, rough surfaces (concrete, brick, limestone), ceramic and various other materials to absorbent or non-absorbent surfaces.
- Filling and sealing joints between metal, wood, ceramic, and PVC on floors. Provides waterproofing in joints of rainwater collection pipes and gutters on roofs.
- Used in various sheet metal joints in automobile, container, and caravan manufacturing; high-vibration ventilation ducts; low-movement connection joints; and floor joints.
Important Considerations
- After drying on the surface, ARDEX CA 20 T can be coated with dispersion, alkyd resin-based paints, and varnishes available on the market. However, due to the variety of paint and coating materials available, it is recommended to test before use to avoid confusion.
- To facilitate application at low temperatures, store the products at room temperature beforehand.
- Always read the manufacturer’s recommendations and instructions, including for products used alongside ARDEX CA 20 T.
- Adhesive residues on unwanted areas should be cleaned with industrial gasoline (White Spirit) or alcohol while the product is still fresh. After curing, it can only be cleaned mechanically.
Packaging
- 290 ml cartridge
- 600 ml sausage
Shelf Life and Storage
Approximately 12 months in its original unopened packaging, stored in dry and cool conditions.
Product Type:
Silan-modified polymer (SMP)
Density:
Approximately 1.60 kg/l
Color:
White or Gray
Material Requirement:
Approximately 30-40 ml/lm (depending on the cut shape of the cartridge tip)
Film Formation Time:
Approximately 45 minutes
Drying/Curing Time:
Approximately 24 hours for 2.5 mm thickness
*Values calculated in laboratory conditions at +23°C temperature and 50% relative humidity. Environmental and weather conditions may alter these values. Higher temperatures and lower relative humidity shorten these times, while lower temperatures and higher relative humidity extend them.
Shore-A Hardness:
Approximately 45
Tensile Strength:
1.5-2.0 N/mm²
Elongation at Break:
≥300%
Volume Shrinkage:
<3%
Working Temperature:
+5°C to +40°C
Temperature Resistance:
-40°C to +90°C
GHS/CLP Classification:
None
GGVSEV/ADR Classification:
None
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
How can I bond various materials effectively both indoors and outdoors?
ARDEX CA 20 T is a silan-modified polymer (SMP) adhesive sealant ideal for bonding materials like concrete, wood, metal, ceramics, and more, offering high adhesion without a primer.
What are the suitable applications for ARDEX CA 20 T?
This adhesive sealant is used for bonding profiles, skirting boards, cable ducts, insulation panels, wooden and synthetic elements, metal profiles, parquet, ceramic, and various materials. It is also used for sealing joints and waterproofing in rainwater collection pipes and gutters.
How do I apply ARDEX CA 20 T for optimal results?
Apply ARDEX CA 20 T using a cartridge or sausage, ensuring the surface is clean and dry. The product cures without sagging or shrinking, providing an elastic seal that is resistant to vibrations.
What are the benefits of using ARDEX CA 20 T?
ARDEX CA 20 T offers high adhesion strength, can be painted over with water-based paints without staining, and cures without sagging or shrinking. It is resistant to vibrations, UV rays, and various cleaning products.
What is the shelf life and storage condition for ARDEX CA 20 T?
ARDEX CA 20 T can be stored for approximately 12 months in its original unopened packaging, in dry and cool conditions.
How can I ensure strong bonding and sealing in high-vibration environments?
Using an SMP polymer-based adhesive sealant like ARDEX CA 20 T ensures strong bonding and sealing in high-vibration environments, such as ventilation ducts and automotive applications.
What is the best adhesive for bonding diverse materials without the need for a primer?
ARDEX CA 20 T provides high adhesion strength without the need for a primer, making it ideal for bonding diverse materials like concrete, wood, metal, and ceramics.
How do I prevent staining when painting over an adhesive sealant?
Choose an adhesive sealant like ARDEX CA 20 T, which can be painted over with water-based paints without causing staining, ensuring a clean and professional finish.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.