Product Details
ARDEX P 82
Synthetic Resin Primer
- Bonding agent on smooth and dense substrates
- Solvent-free
- Two component
- Replaces Neoprene primer
- Safe during storage, transport and processing
ARDEX P 82: Solvent-Free Epoxy Primer
ARDEX P 82 is a solvent-free, two-component epoxy primer that provides strong adhesion on glossy and smooth surfaces. Ideal for a variety of substrates including concrete, wood, ceramic tiles, and metal. It creates an effective adhesive film, is easy to apply, and has a shelf life of 12 months when stored properly. Suitable for indoor use.
Description
Solvent-free, reactive two-component synthetic resin dispersion consisting of:
-ARDEX P 82, Component A, light red, and
-ARDEX P 82, Component B, white,
which, when mixed 1 : 1, produce the light red ARDEX P 82 synthetic resin primer.
Reaction and drying produce a bonding agent that is effective on all smooth and dense substrates.
Use
Indoor. Walls, floors and ceilings.
Primer and bonding agent on smooth and dense substrates such as;
- Prefabricated concrete floors or particularly compacted
- Cement screeds under levelling compounds,
- Poorly sanded mastic asphalt screeds,
- Old mastic asphalt floors,
- Modified calcium sulphate screeds,
- Magnesite screeds,
- Chipboard,
- Wood,
- Terrazzo,
- Sandstone,
- Tiles,
- Clinker bricks,
- Sheet steel,
- Synthetic resin coatings,
- Paint, oil and plastic coatings,
- Under levelling compounds and thin-bed mortars.
Considerations
The drying time is approx. 60 minutes, depending on ventilation, temperature and substrate type. Low temperatures and/or high humidity can delay the hardening of the primer.
In case of doubt, carry out a test application.
Packaging
6kg unit consisting of 3kg of each component in plastic containers, or
2kg unit consisting of 1kg of each component in plastic containers.
Storage and Shelf Life
Can be stored in dry rooms for approx. 12 months in the original sealed container.
Base
Synthetic resin
Colour
Component A, light red
Component B, white
Density
Approx. 1,0 kg/lt
PH
approx. 11
Material requirement
approx. 100 – 200 g/m²
Working time*
approx. 60 minutes
Drying time*
approx. 60 minutes
*Values calculated under lab conditions (+20°C room temperature 65% relative humidty). Weather and environmental conditions may affect the values. Higher temperatures and low humidty decreases the time requried, whereas lower tetemperatures and high humidty increases it.
GHS/CLP classification
GHS 07 “Harmful”
Signal word: ‘Danger’
GGVSEV/ADR classification
none
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
What surfaces can ARDEX P 82 be used on?
ARDEX P 82 can be used on prefabricated concrete, smooth cement screeds, poured asphalt screeds, anhydrite and magnesite screeds, chipboard, wood, terracotta, sandstone, ceramic tiles, clinker, steel sheets, laminated surfaces, and polished, oiled, or plastic-painted surfaces.
Is ARDEX P 82 safe for indoor use?
Yes, ARDEX P 82 is solvent-free and safe for indoor use. It does not pose any hazards during storage, handling, or application.
How do I mix ARDEX P 82 components?
Mix ARDEX P 82 Component A (pink) and Component B (white) in a 1:1 ratio to create the primer.
What is the shelf life of ARDEX P 82?
ARDEX P 82 has a shelf life of approximately 12 months when stored in its original unopened packaging, in dry conditions, and protected from sunlight and frost.
What is the material requirement for ARDEX P 82?
The material requirement for ARDEX P 82 is approximately 100 – 200 g/m², depending on the surface.
Can ARDEX P 82 be used on smooth and glossy surfaces?
Yes, ARDEX P 82 is designed to provide adhesion on smooth and glossy surfaces, creating an effective adhesive film.
Does ARDEX P 82 contain solvents?
No, ARDEX P 82 is completely solvent-free, making it a safe and environmentally friendly option.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.