Product Details
ARDEX B 16
Concrete Repair Mortar
- For structural repairs of concrete and reinforced concrete elements; filling cracks and voids
- High chemical and mechanical resistance
- Can be applied in a single layer up to 70 mm
- Very low internal stress and minimal cracking risk
- Contains corrosion preventive additives
- Resistant to freezing, salts, and sulfates
- Compliant with TS EN 1504-3 and EN 1504-7 standards
ARDEX B 16: High-Performance Corrosion Preventive Repair Mortar
ARDEX B 16 is a high-strength, corrosion preventive structural repair mortar for concrete and reinforced concrete. It offers excellent chemical and mechanical resistance, can be applied in thicknesses up to 70mm, and minimizes cracking. Suitable for a variety of structural repairs, it adheres well to concrete and reinforcement, resists freezing, salts, and sulfates, and meets EN 1504-3 and EN 1504-7 standards.
Description
Ready to use, fiber reinforced PCC concrete repair mortar with anti-corrosive effect. High strength. Certified to EN 1504-3 “Static and not statically relevant repair “as R4-mortar for the static relevant repair. Can be hand or machine processed become. The low-shrinkage curing causes cracking minimized. Resistant to frost, salts and sulfates. Contains active pigments, which protect the reinforcement from corrosion. Certified to EN 1504-7 “Corrosion protection of reinforcement”. High wear resistance. Can be applied in layer thicknesses of 5 to 70 mm per operation.
Use
For indoor and outdoor. Wall, floor and ceiling. For filling and reprofiling holes and breakouts with exposed reinforcement. For repairing and aligning concrete surfaces. For repair precast concrete and reinforced concrete structures such as balcony slabs, straps and supports. Subway, highway, tunnel, dam etc. in engineering structures. Protects the reinforcement against corrosion.
Considerations
For the assessment of the load-bearing capacity of the damaged concrete component, for the assessment of reinforcement, concrete cover, etc. and for the determination of the resulting necessary refurbishment is in doubtful cases a knowledgeable planner or structural engineer to consult
Packaging
25 kg kraft bag
Shelf Life and Storage
Can be stored for approximately 12 months in its original unopened packaging in a dry and cool place.
Mixing Ratio:
Approximately 4.0 – 4.5 liters of water for 25 kg of powder
(1 volume water : 4 – 4.5 volumes powder)
Dry Powder Density:
Approximately 1.4 kg/l
Fresh Mortar Density:
Approximately 2.1 kg/l
Material Requirement:
Approximately 1.8 kg powder/m²-mm
Working Time (+20°C):
Approximately 60 minutes
Service Time (+20°C):
Approximately 24 hours
Compressive Strength:
Approximately 48 N/mm² after 28 days
Flexural Strength:
Approximately 8 N/mm² after 28 days
Application Thickness:
5-70 mm
Corrosion Properties:
Contains additives to prevent corrosion
Compressive Strength Class:
R4 class according to EN 1504-3
GHS/CLP Classification:
- GHS 05 “corrosive”
- GHS 07 “irritant”
- Signal word: Danger
GGVSEV/ADR Classification:
None
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
How can I prevent corrosion in concrete repairs?
Using a specialized mortar like ARDEX B 16 prevents corrosion in concrete repairs. It contains active pigments that protect reinforcement from corrosion and meets EN 1504-7 standards for corrosion protection.
What mortar is best for structural repairs in aggressive environments?
ARDEX B 16 is ideal for structural repairs in aggressive environments. It offers high mechanical and chemical resistance, minimizes cracking, and adheres well to concrete and reinforcement.
How do I repair and level concrete surfaces effectively?
ARDEX B 16 can be applied in thicknesses from 5 mm to 70 mm, making it suitable for repairing and leveling concrete surfaces, including those in subways, highways, tunnels, and dams.
What are the advantages of using a high-strength repair mortar?
ARDEX B 16 provides high adhesion, very low shrinkage, resistance to freezing, salts, and sulfates, and meets the R4 class standard according to EN 1504-3 for structural and non-structural concrete repairs
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.